EuroGrills custom grills

Installation process for Middle Grill
1) Cut 6-8 pieces of wire into 6” sections.
2) Simple loop the wire around the stock grill so the ends are facing you.
3) Repeat this step around the grill try to keep them in the corners and middle for the most secure told.
4) Then place the insert grill over the ends of wire, try to feed the wire through 2 holes next to each other and twist once for a temporary hold.
5) Repeat step 4 until you have all the wire ends through the insert.
6) Next twist the wire tight up against the insert using your pliers.
7) To finish clip the ends of wire about 3 winds up with your wire cutters and bend the ends into the mesh.
8) Repeat this same process for the side inserts.